DAGE-MTI DC-200 Manual do Utilizador

User’s Manual DAGE-MTI DC-200 Color Camera

Back Light If the scene has too much Back Light (light behind the subject) the AGC (Automatic Gain Control) and Auto Shutter circuits may adjust to th

Focus Adjustment (mechanical back-focus) The Back-Focus is calibrated at the factory and should not need readjustment, however if adjustment is necess

Specifications: CCD Sensor: 1/3” Interline /w Micro Lenses NTSC: 768x494 Effective Pixels PAL: 752x582 Effective Pixels Sensitivity: 0.015fc, (0.

Troubleshooting No Picture (Check or try the following): 1. Camera Power On? a. External Power Supply Attached? b. AC Power On? c. LED on Camera Fron

Warranty The DAGE-MTI DC-200 is warranted to be free of defects in material and workmanship in normal use for a period of one year from the original

Limitations 1. This warranty is valid only if the malfunctioning unit is returned to DAGE-MTI service depot. This warranty does not cover on-location

DAGE-MTI Inc. 701 N. Roeske Ave. Michigan City, IN 46360 (219) 872-5514 Fax: (219) 872-5559 E-mail: [email protected] http://www.dagemti.c

Purchaser’s Record Model Name: DAGE-MTI DC-200 Serial Number: Dealer’s Name: Dealer’s Address: Dealer’s Phone Number: Date Pu

Introduction The DAGE-MTI DC-200 is a compact color camera based upon a single 1/3” Interline CCD that provides a high resolution color image. The

Installation OSD KEYBOARDDC 12VY/CVIDEOMONITORVIDEO(COMP) OR Y/C12V, 200mAOSD REMOTEDC 200DAGE-MTI Figure 1: DC-200 Connections

Power The red LED located on the camera front lights when power is supplied to the camera. The camera requires approximately 200mA at 12VDC. The ext

Operation Connect the DC-200 to the OSD Remote and Monitor, then apply Power. Push the MENU button on the remote to activate the On Screen Display M

For example, to change the shutter setting from off to auto: 1. Press MENU. WHITE BALANCE will be flashing. 2. Press DOWN. SHUTTER will be flashing.

Auto (ATW): This setting places the camera into Auto Tracking White balance mode. In this mode the camera continuously measures the object color tempe

Shutter (Electronic Shutter) Off: Camera is set to standard 1/60 (1/50 PAL) second shutter. No excessive light shuttering is performed. Camera gain